1. Turn on all washers and dryers with Greenwald Pay devices installed in them or one at a time it doesn’t matter. The control consoles should be open and the Greenwald Pay devices should be visible to see the LED light. (It should be slow blinking white)
2. Label each machine with W1-W99 for washers and D1-D99 for dryers
3. Download the “Greenwald Pay” app from the Apple or Google Play store.
4. Log into the app with your admin credentials. Note: If you do not have admin credentials then you will need to get these from a system administrator or you will need to be added as a Greenwald Management System (GMS) user with admin privileges.
5. Tap the Admin button at the top of the app
6. Tap the Setup button located in the room window.
7. Select the appropriate account from the Accounts pull down menu. Note: Accounts are created and edited in the GMS website.
8. Select the appropriate location from the Locations pull down menu. Note: Locations are created and edited in the GMS website.
9. Tap the Next button. This will bring you to the Machines screen.
10. Select a Greenwald Pay device from the right column under Room. The Greenwald Pay device selected will turn blue.
11. Then select the Assignment from the left column that matches the label installed on the machine (from step 2) that has a solid blue light on.
12. Tap Update setup on the bottom of the App
13. Repeat steps 10-12 until all machines and Greenwald Pay devices are assigned
14. Close all machine console panels and the install is complete